Plate Rolling, Forming, Bending, Pressing.

Rolling facilities at Reliable Pipes & tubes Ltd. enable the forming of complete cylinders or partial multiple plate segments, to meet the demands of gas or liquid storage, pressure vessels, and all other types of cylindrical components required within our industry.

We work extensively with ferrous and non-ferrous materials through a range of material thickness from 3mm to 60mm.

A proportion of our range can be pre-ended without an additional bending allowance to minimise waste and can be supplied with plasma cut or machined edge preparations inclusive of machined tapers to suit design requirements.

In addition our extensive fabrication, welding and machining capabilities enable us to offer 100% completed components or assemblies, fully certified to specification requirements, conducted to International standards of practice.

Rolling Capabilities at Reliable Pipes & Tubes Ltd.:

  • 3000 x 45 mm – Fully CNC
  • 3000 x 20 mm – Fully CNC
  • 2250 x 10 mm – ( For min 230 dia Tubes)
  • 1250 x 10 mm – ( For min 150 dia Tubes)
  • Large thickness range.
  • End / edge preparing available, machined or flame cut
  • All welding needs catered for to International standards using Submerged Arc and Flux cored welding processes.
  • Can supply rolled, prep roll and bridge tack or rolled and welded
  • Heat treatment to requirements
  • NDT testing as required by qualified in house and external inspectorate.

Press brake facilities at Reliable Pipes & Tubes Ltd. allow for the forming of light to heavy plate produacts to produce cylindrical, conical, square to round, and many other complex shapes in thicknesses from 3mm to 75 mm in ferrous and non- ferrous materials.

Our CNC facilities and experienced operators, ensure the accuracy and quality of components required by our Clients and specifications.

A proportion of our range can be pre-ended without an additional bending allowance to minimise waste and can be supplied with plasma cut or machined edge preparations inclusive of machined tapers to suit design requirements.

In addition our extensive fabrication, welding and machining capabilities enable us to offer 100% completed components or assemblies, fully certified to specification requirements, conducted to International standards of practice.

Press Brakes at Reliable Pipes & tubes Ltd. include:

  • 650 Ton CNC x 6 m x 25mm
  • 650 Ton CNC x 4 m x 30mm
  • 400 Ton Capacity 4000 mm x 25mm.
  • 150 Ton Capacity 3000 mm x 3mm.
  • Welding service available to International standards.
  • Pipe Forming / shallow radius pressings
  • Complex shapes with minimal welding

We use an ESAB Supraex 5000 Plasma machine with the added facility of oxy- acetylene. This equipment provides outstanding levels of precision across all operations and utilises VISION 51 control and Columbus 3 programing and nesting system.

With a 30 metre x 4 metre bed cutting capability we are able to profile the largest formats and more parts in less time, through the benefit of intelligent automated production.

In addition, we are also able to automatically produce beveled edges for welded seams and tapers, to suit the requirements of weld joint set up and design.

Our in house drawing capability allows for the receipt of customer drawings in DWG, DXF formats etc. which are compatible with our own internal software package.

Our Cutting Capabilities:-

  • Large 30 metre x 4 metre cutting bed capacity.
  • Up to 65 mm thickness in stainless steels and non-ferrous materials
  • Up to 250 mm thickness in carbon steels.
  • 20 Ton EOT crane lifting capacity.

Guillotines:-

  • 3 metre x 12mm Capacity.
error: Content is protected !!